Plaster pool is the process of adding the last coat of seal to your pool. This process is also called pool plaster or pool plastering. It is an alternative to tiling the pool or painting it. Plastering is essential if you have a concrete in-ground pool.
It keeps the pool sealed and protects the water from leaking out. There are a lot of reasons why pool plastering is more favored than other types of pool finishing. These include :
- It's budget-friendly when compared to others
- It's durable
- Using plaster is safe and non-toxic
How does the plaster pool work?
Plastering a pool is not only a necessity to pool finishing, it also has aesthetic benefits for the pool. Because you're not limited to a particular style, it's easy to choose your desired pool plaster finish yourself.
You can choose the color and style that will favor your style and personality. There are several colors to choose from. The colors range from white, azure, sky blue, blue gem, etc. Just make sure whatever colors you choose can blend easily with your future designs too.
Plastering a pool may be able to fix a leak, but it is not appropriate to directly layer the plaster on the leak without first fixing the leak itself. It's like bandaging a leg cut without first stitching the cut. It may heal, but it could be infected. And that would cause a bigger health challenge.
So to fix a pool leak, the pool plastering stage is the best time to thoroughly inspect and search for any leak whatsoever. If leaks are found and they are just surface leaks, they can be sealed by the plaster.
But if the leak is deeper, a leak detection test should be conducted to determine how many leaks and how deep the leaks are. After which the leaks themselves are fixed before the plaster is added.
It is necessary to know that plastering a pool is the final stage of sealing the pool and not the first or only stage.
Type of Plaster You Can Choose?
There are different types of pool plaster and your preference will depend largely on your taste. You can have the type of plaster that helps you absorb heat or the one that leaves your pool cool. The common types include:
White Marble Plaster
The white marble plaster is the traditional pool plaster used for most pools. It's usually achieved by a mixture of white cement and marble dust. This is mostly fortified with additives that increase the strength and water resistance of the pool. If this pool is well maintained, it could be durable for about 12 years.
Yet, it is easily susceptible to damage, especially if the water Ph is not balanced. Of all the pool plaster finishings, it is the most budget-friendly finish too.
Quartz Scapes Plaster
As one of the strongest minerals on earth, quartz, gives your pool a beautiful and strong finish. The beauty of a quartz finish is quite durable and can last for a long period.
More specifically, it can last for about 12-15 years depending on the general maintenance of the pool. Not only is it beautiful and durable, but it is also safe and slip-resistant.
Pebbles Touch Plaster
Exquisite and luxurious. This type of pool plaster finish gives the pool the vibe and look of a riverbed. It is aesthetically beautiful and slip-resistant.
Although it is quite expensive, the luxury look, feel and durability of the plaster will make the amount spent well worth it.
How to Build the Plaster Pool?
Plastering is a good way to protect your pool. However, the process of plastering should be done carefully for the best result. Here is how to go about it.
Preparation
The first step to plastering is preparation. Nothing beats preparation. To prepare the pool, you have to consider if it's old or new.
For an old pool, you would need to drain it first. Sweep and clean out the dirt in it. Remove the old plaster, smoother the rough edges, and then thoroughly wash it clean. The same process goes for a new pool except that you don't need to drain any water away.
Pre-plaster preparation
The pre-plaster preparation involves an active washing of the pool wall and surface with acid. Thereafter, it is rinsed off with clean water and given time to dry out.
As soon as it gets dry, the bond coat can be used on it. This will take approximately 8 hours to dry out.
Plaster application
This is the next stage and plaster application will only work after the bond coat is dried out.
To apply the plaster, you have to start from the deepest part of the pool. You should also start your application with a ⅜" thick while you subsequently change to ¼".
You should apply the plaster smoothly all through the application. Wait and allow the plastering to dry out. Inspect it and be sure the pool is well-plastered from end to end. After that, fill it up with water.
Do you Need To Plaster Your Pool? BMW Pools Will Do An Excellent Job
Pool plastering does not work for the mediocre. You need excellent-minded experts to give you a great finish. It is the basic finish that defines how attractive and safe your pool will be.
But, it does much more than that. It also defines how long your pool will last before the water starts leaking. You want to call the best hands possible to get the job done. Calling professionals will cost you extra, but it will save you a lot of costs in the long run.
The professional will be able to properly vent your pool, observe, point out and fix any leaks before they start the plastering work. They would also make sure the plaster is well done to suit your style.
If you need such professionals, you should contact BMW pools, they are experts with good reviews and years of experience.